1822 W Wilson Ave, Chicago, IL 60640Open 24/7 for emergencies(844) 914-1811Free Estimate

Pipe Repair, Repiping and Installation in Chicago, IL

Leaking, corroded or low-pressure pipes need the right fix. We repair, replace and install water supply and drain piping in Chicago properties.

Call (844) 914-1811

Pipes are the part of your plumbing that you never see until something goes wrong. In many Chicago buildings, those pipes have been carrying water for decades. Over time, metal corrodes, joints loosen, and winters stress anything in an exterior wall or unheated space. The result might be a single pinhole leak, a burst section after a deep freeze, or a gradual loss of water pressure throughout the building.

Netzel Plumbing repairs and replaces water supply and drain piping, and installs new lines for remodels and additions, across Chicago, IL. We aim to fix the problem at its source and give you straightforward advice about whether a repair or larger replacement is the better investment. Call (844) 914-1811 to get started.

Signs Your Pipes Need Attention

  • Repeated leaks in different parts of the house
  • Rusty, brown or metallic-tasting water, especially after the water has been off
  • Low water pressure throughout the building, not just at one fixture
  • Visible corrosion, green stains on copper or white mineral crusting on joints
  • Banging or vibrating pipes
  • Pipes that sweat heavily or feel unusually cold in winter
  • Wet spots, bubbling paint or a musty smell that suggests a hidden leak

If you suspect a hidden leak but cannot find it, our leak detection service can trace it before any repair begins.

What Causes Pipe Problems in Chicago Buildings

Age and corrosion

Galvanized steel pipes corrode from the inside, narrowing the passage and eventually reducing pressure or leaking. Copper can develop pinhole leaks depending on water chemistry.

Freezing and thawing

Water expands when it freezes, and pipes in garages, crawl spaces and exterior walls are especially vulnerable. A burst often appears when things warm up.

Water pressure and movement

Excessive pressure or water hammer can stress joints and fixtures over time.

Past renovations

Mixed pipe materials, improper connections or work done without permits can lead to leaks and compatibility issues years later.

Lead service lines

Many older Chicago properties have a lead service line connecting the building to the city water main. Replacing lead lines often involves coordination with the city, and we can explain what applies to your property. For water quality questions, consider testing and consulting official city resources.

Our Pipe Repair and Installation Process

  1. Assessment. We examine accessible piping, test pressure and ask about the history of leaks and repairs.
  2. Diagnosis. We identify the type, age and condition of your pipes and decide whether the issue is isolated or system-wide.
  3. Options and estimate. You receive clear choices, from a targeted repair to partial or full repiping, with pricing before work begins.
  4. Preparation. We protect floors and furnishings, shut off and drain the water and arrange permits where required.
  5. Installation or repair. We cut out damaged sections, install new piping with appropriate fittings and connect to existing lines properly.
  6. Testing and restoration. We pressure-test the system, check for leaks, restore water service and clean up the work area.

Pipe Materials and Which One Fits Your Job

Copper

Copper is durable, long-lasting and widely used. It costs more than plastic options and can be affected by certain water conditions, but it remains a trusted choice.

PEX

Cross-linked polyethylene is flexible, resists corrosion and can be installed with fewer fittings, which helps in tight spaces and reduces the amount of wall access needed. It is not appropriate for every situation, so we confirm local code requirements.

CPVC

This rigid plastic is used for hot and cold water lines in some applications and is resistant to corrosion.

PVC and ABS

These plastics are common for drain, waste and vent lines. They are lightweight, smooth inside and straightforward to join.

Cast iron

Many older buildings have cast iron drain stacks. It is strong and quiet but can corrode over time, and we can repair sections or transition to modern materials where suitable.

Repair, Partial Replacement or Full Repiping?

One leak does not always mean the whole system is failing. We recommend a spot repair when the surrounding pipe is sound. Repiping becomes worth considering when leaks keep appearing, water quality or pressure is poor throughout the building, or the existing material is known to fail with age. We explain the tradeoffs so the decision is yours, not ours.

New Pipe Installation for Remodels and Additions

Adding a bathroom, finishing a basement, moving a kitchen or converting a space all require new piping. We plan routes carefully, size supply and drain lines correctly and coordinate with your contractor. For larger projects, see our kitchen and bathroom plumbing service.

Why Professional Pipe Work Matters

  • Reliability. Properly joined and supported pipes avoid repeat failures.
  • Code compliance. Pipe materials, supports and venting must follow local plumbing code.
  • Water quality and pressure. Correct sizing improves flow and reduces noise.
  • Protection of your property. Water damage from a failed joint costs far more than doing the work right.

Why Chicago Customers Choose Netzel Plumbing

  • Honest recommendations that fit your budget and building
  • Written, upfront pricing before work starts
  • Emergency repair available 24 hours a day
  • Technicians who explain materials, options and tradeoffs clearly

Protecting Pipes From Freezing and Bursting

Chicago winters make freeze protection a practical concern for nearly every building. Before the cold sets in:

  • Disconnect and drain outdoor hoses, and shut off exterior spigots from inside if they have dedicated valves
  • Insulate pipes in basements, crawl spaces, garages and exterior walls
  • Seal drafts near pipes where cold air enters
  • Keep the heat on in vacant units and let faucets drip slightly during extreme cold
  • Open cabinet doors under sinks on exterior walls to let warm air reach the pipes

If you travel in winter, ask someone to check the property or consider a water leak sensor with alerts.

Why Pipe Size and Water Pressure Matter

Pipes that are too small can leave you with weak pressure when multiple fixtures run together, while excessive pressure strains fittings and appliances. When we replace or add piping, we consider the number of fixtures, the length of the runs and the incoming pressure so the system works well day to day. A pressure regulator may be recommended if your pressure is higher than recommended levels.

Pipe Service Across Chicago

We work in Uptown, Lakeview, Lincoln Park, Logan Square, Avondale, Humboldt Park, Wicker Park, Bucktown, Gold Coast, Old Town, Bronzeville, Hyde Park and other neighborhoods. For a pipe that has burst right now, shut off the main valve and see our emergency plumbing page.

Pipe Repair FAQs

How do I know if I need repiping?

Frequent leaks, discolored water, poor pressure throughout the home and aging galvanized or failing pipe are common signs. An inspection helps determine whether repiping is justified.

How long does repiping take?

It depends on the size of the property and access. Smaller jobs may take a day or two, while whole-building repiping takes longer.

Will repiping damage my walls?

Some wall access is typically needed. We plan routes to limit openings and can coordinate patching or refer you to a contractor for finishing work.

What should I do if a pipe freezes?

Shut off the water, open nearby faucets and avoid using open flames. Slowly warm the area with a hair dryer if it is safe, or call us for help.

Is PEX as good as copper?

Both are accepted for water supply. PEX is flexible and corrosion-resistant, while copper is time-tested and rigid. The best choice depends on the job.

Do you handle permits?

Where permits are required, we explain the process and help you handle it as part of the project.

📞 Call Now: (844) 914-1811