1822 W Wilson Ave, Chicago, IL 60640Open 24/7 for emergencies(844) 914-1811Free Estimate

Kitchen and Bathroom Plumbing in Chicago, IL

Remodel or repair, we handle the plumbing for kitchens and bathrooms in Chicago, from fixture installation to rough-in and relocations.

Call (844) 914-1811

Kitchens and bathrooms are where plumbing does most of its work, and where a remodel can succeed or struggle based on what is behind the walls. Beautiful cabinets and tile will not make up for a shower valve that leaks, a drain that does not slope correctly or a dishwasher that was never properly connected.

Netzel Plumbing provides plumbing for kitchen and bathroom projects throughout Chicago, IL, from a single fixture upgrade to full remodels. We work with homeowners, landlords and contractors, and we focus on getting the unseen parts right. To discuss your project, call (844) 914-1811.

Kitchen Plumbing Services

Sinks and faucets

We install new kitchen sinks and faucets, including pull-down sprayers, pot fillers and filtered water taps. For fixture-specific repairs, see our faucet and sink repair page.

Garbage disposals

We install and replace disposals, connecting them correctly to the drain and electrical supply. A clogged or jammed unit can also be diagnosed and repaired.

Dishwasher and ice maker connections

Proper supply, drain connection and air gap or high loop protect against leaks and backflow.

Gas lines for ranges

If your remodel includes a gas range or cooktop, our gas line services team handles safe installation and testing.

Relocating plumbing

Moving a sink to an island or changing the layout means new supply and drain routes with proper venting.

Bathroom Plumbing Services

Showers and tubs

We install shower valves, trim kits, tub fillers and drains, whether it is a standard alcove tub or a walk-in shower. Correct valve depth and waterproofing coordination are critical to preventing leaks behind tile.

Vanities and sinks

Single and double vanities, pedestal sinks and wall-mounted options all have different plumbing requirements. We position supply and drain lines to match your fixture.

Toilets and bidets

New or replacement toilets are set with a proper seal and secured to the flange. See our toilet repair page for troubleshooting and repair.

Adding a bathroom

Finishing a basement or converting space to add a half-bath or full bath requires careful planning for drain slope, venting and water supply, and often an ejector pump when the drain sits below the main line.

Plumbing Rough-In: The Part You Never See

Rough-in is the plumbing installed before walls and floors are closed up. It determines where every fixture will sit and how well it will work. Good rough-in includes:

  • Correctly sized supply and drain lines
  • Proper venting so fixtures drain quietly and traps stay sealed
  • Shutoff valves that are accessible
  • Pressure testing before walls are covered
  • Coordination with the electrician, tile installer and general contractor

Mistakes at this stage can cost much more to fix later, which is why we plan the layout before cutting anything.

Our Remodel Plumbing Process

  1. Project review. We look at your plans, existing plumbing and what you want to change.
  2. Site visit. We inspect the pipes, drains, vents and access points to see what the building can support.
  3. Scope and estimate. You receive clear pricing that separates rough-in from fixture installation, so you know what you are paying for.
  4. Scheduling. We align with your contractor’s timeline to avoid delays and rework.
  5. Rough-in and testing. We install lines, pressure-test them and coordinate any inspections before walls are closed.
  6. Finish plumbing. After tile, cabinets and countertops, we set the fixtures, connect appliances and test every connection.
  7. Final walkthrough. We review operation, shutoffs and care with you.

Fixtures, Materials and Choices to Consider

  • Valves and cartridges. Pressure-balancing or thermostatic shower valves help prevent sudden temperature changes.
  • Drain size and type. Larger kitchen sinks and freestanding tubs need appropriate drain and venting.
  • Water-saving fixtures. Low-flow showerheads, aerators and efficient toilets can reduce water use.
  • Finish durability. Brass-bodied fixtures with durable finishes tend to hold up better over time.
  • Supply and drain materials. Copper, PEX and PVC are common, and the best option depends on your building and code.
  • Water heater capacity. A large soaking tub or body sprays may require more hot water than your current heater provides. See water heater repair and replacement.

Benefits of Hiring a Plumber for Your Remodel

  • Fewer surprises. We identify hidden problems such as corroded pipes or poor venting before they derail the schedule.
  • Code compliance. Permits and inspections are handled correctly.
  • Better performance. Properly sized lines mean steady pressure and proper drainage.
  • Long-term protection. Quality connections prevent leaks that damage your new finishes.

Why Chicago Homeowners Choose Netzel Plumbing

  • Clear, itemized estimates before work begins
  • Willingness to work alongside your contractor or designer
  • Honest advice on options, including when a simpler approach will do
  • Respectful, tidy work in your home

Planning Tips and Budget Considerations

A little planning prevents costly changes after work begins.

  • Choose fixtures early. Rough-in dimensions depend on the exact models, and late changes can force rework.
  • Allow for the unexpected. Older buildings may reveal corroded pipes, outdated drains or missing venting once walls open up.
  • Keep fixture locations simple if budget is tight. Keeping sinks, toilets and showers near existing lines usually lowers plumbing cost.
  • Think about access. Shutoff valves and cleanouts should remain reachable after the remodel is finished.
  • Ask about timing. Rough-in, inspections and finish plumbing happen at different points, and clear scheduling keeps the project moving.

Plumbing for Landlords and Rental Properties

If you manage rental units, kitchens and bathrooms see heavy use and frequent turnover. We can handle fixture upgrades, repairs between tenants and coordination with your maintenance staff. Durable, easy-to-service fixtures often cost less over time than the cheapest options, and we are glad to suggest choices that balance price and reliability.

Kitchen and Bathroom Plumbing Across Chicago

We work in Lakeview, Lincoln Park, Roscoe Village, Logan Square, Wicker Park, Bucktown, West Loop, Gold Coast, Old Town, Hyde Park, Beverly and other Chicago neighborhoods. If your remodel uncovers old or damaged lines, our pipe repair and installation team can address it right away, and our drain cleaning service can clear problem drains before new fixtures go in.

Kitchen and Bathroom Plumbing FAQs

When should I hire a plumber during a remodel?

Early. Plumbing decisions affect layout, framing and budget, so it helps to involve a plumber before demolition and certainly before walls are closed.

Can you move my sink, toilet or shower?

Usually yes, though moving fixtures far from existing drains and vents can add cost. We review your options during the site visit.

Do I need permits for bathroom or kitchen plumbing work?

Many remodels require permits, particularly when relocating lines or adding fixtures. We explain what applies to your project.

Can you install fixtures I bought myself?

Yes. Please share model numbers in advance so we can confirm compatibility and gather any parts needed.

How long does bathroom plumbing take?

Rough-in often takes a day or two, with finish plumbing later after tile and cabinets. A full remodel schedule depends on the entire scope.

What if you find old pipes behind the wall?

We will show you what we found and give options for repair or replacement. It is far easier to address while the wall is open.

📞 Call Now: (844) 914-1811